10KM 100G QSFP28
HUA-QS1H-3110D is a parallel 100Gb/s Quad Small Form-factor Pluggable (QSFP28) optical module. It provides increased port density and total system cost savings. The QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 25Gb/s operation for an aggregate data rate of 100Gb/s on 10km of single mode fiber.
Product Features
- Hot pluggable QSFP28 MSA form factor
- Compliant to IEEE 802.3ba 100GBASE-LR4
- Up to 10km reach for G.652 SMF Supports 103Gbps
- Single 3.3V Power Supply and Power dissipation < 3.5W
- 4 channels full-duplex transceiver modules
- 4 x 25Gb/s DFB-based LAN-WDM Cooling transmitter
- 4 channels PIN ROSA
- Internal CDR circuits on both receiver and transmitter channels
- 3.3V power supply voltage
- Operating case temperature: 0~70℃
- Duplex LC receptacles
- I2C interface with integrated Digital Diagnostic Monitoring
- RoHS-6 compliant
Specification
|
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
| Signaling Speed per Lane |
25.78 |
Gbps |
|||
| Data Rate Variation |
-100 |
+100 |
ppm |
||
|
Transmitter |
|||||
| Lane_0 Center Wavelength |
λC0 |
1294.53 |
1295.56 |
1296.59 |
nm |
| Lane_1 Center Wavelength |
λC1 |
1299.02 |
1300.05 |
1301.09 |
nm |
| Lane_2 Center Wavelength |
λC2 |
1303.54 |
1304.58 |
1305.63 |
nm |
| Lane_3 Center Wavelength |
λC3 |
1308.09 |
1309.14 |
1310.19 |
nm |
| Total Average Output Power |
Po |
10.5 |
dBm |
||
| Average Launch Power per Lane |
Peach |
-4.3 |
4.5 |
dBm |
|
| Optical Modulation Amplitude(OMA)each Lane |
TxOMA |
-1.3 |
4.5 |
dBm |
|
| Difference in launch power between any two lanes(OMA) |
5 |
dB |
|||
| Launch power in OMA minus TDP ,each lane |
-2.3 |
dBm |
|||
| Transmitter and dispersion penalty(TDP),each lane |
2.2 |
dB |
|||
| Extinction Ration |
ER |
4 |
dB |
||
| Side-mode Suppression ration |
SMSR |
30 |
dB |
||
| Average launch power of OFF transmitter per lane |
-30 |
dBm |
|||
| Relative Intensity Noise |
RIN |
-130 |
Db/hz |
||
| Transmitter Reflectance |
-12 |
dB |
|||
| Optical Return Loss Tolerance |
20 |
||||
| Transmitter eye mask definition {X1, X2, X3, Y1, Y2, Y3} |
(0.25,0.4,0.45,0.25,0.28,0.4) |
dB |
|||
|
Receiver |
|||||
| Signaling Speed per Lane |
BRAVE |
25.78 |
Gbps |
||
| Damage threshold per lane |
Rxdmg |
5.5 |
dBm |
||
| Data Rate Variation |
-100 |
+100 |
ppm |
||
| Lane_0 Center Wavelength |
λC0 |
1294.53 |
1296.56 |
1296.59 |
nm |
| Lane_1 Center Wavelength |
λC1 |
1299.02 |
1300.05 |
1301.09 |
nm |
| Lane_2 Center Wavelength |
λC2 |
1303.54 |
1304.58 |
1305.63 |
nm |
| Lane_3 Center Wavelength |
λC3 |
1308.09 |
1309.14 |
1310.19 |
nm |
| Receive Power(OMA) per lane |
RXOMA |
4.5 |
dBm |
||
| Average Receive Power per Lane |
RXpow |
-10.6 |
4.5 |
dBm |
|
| Receive Sensitivity in OMA per Lane |
RXsens |
-8.6 |
dBm |
||
| Receiver 3dB electrical upper cutoff frequency,per lane |
31 |
GHZ |
|||
| Stressed Receiver Sensitivity(OMA)per lane |
RXSRS |
-6.8 |
dBM |
||
| Optical Return Loss |
ORL |
-26 |
dB |
||
| LOS Assert |
LOSA |
-25 |
dBm |
||
| LOS De-Assert |
LOSD |
-12 |
dBm |
||
| LOS Hysteresis |
0.5 |
dB |
|||
| Vertical eye closure |
VECP |
1.8 |
dB |
||
| Stressed eye J2 Jitter |
J2 |
0.3 |
UI |
||
| Stressed eye J9 Jitter |
J9 |
0.47 |
UI |
||
Applications
- 100GBASE-LR4 100G Ethernet
